Custom Fit Shrink Covers — Precision Protection, Zero Waste
A custom-fit shrink cover, pre-cut or pre-formed to your product's exact dimensions from high-grade LLDPE film. Heat is applied — the cover shrinks tightly around every edge, corner, and contour. No trimming. No loose folds. No wasted material. Optional reinforced, flame-retardant, and VCI configurations available.
What Is a Custom Fit Shrink Cover
Standard shrink film comes off a roll. You cut it, wrap it, trim the excess, and hope the corners stay covered. A custom fit shrink cover skips all of that. It arrives already cut to your product's shape — just drape it over, apply heat, and let the film pull tight across every surface. Edges stay flush. Awkward angles get full coverage. Nothing flaps in the wind.
Custom-Fit Covers vs. Standard Shrink Film
If your team spends half the day cutting and trimming film around irregular products, custom fit covers strip the process down to two moves — cover and shrink.
| Features | ECOPACK Custom Fit Shrink Cover | Standard Shrink Film Roll |
| Sizing | Made to your measurements | You measure and cut on site |
| Installation | Drop on, heat, done | Cut, wrap, trim, adjust |
| Waste | None — pre-sized | Scrap from trimming |
| Fit on complex shapes | Wraps tight around curves and edges | Gaps, bunching, exposed spots |
| Labor | Two steps | Multiple passes and adjustments |
| Result | Even seal, no openings | Coverage depends on operator |
Custom Fit Shrink Cover Options
One size does not fit all — and one material does not either. We offer three ways to configure your shrink cover, depending on what you are protecting and where it is going.
Standard Shrink Cover
High-grade LLDPE film, pre-cut to your dimensions. Good for light to medium-duty applications — indoor storage, dust protection, short-haul transport. Simple, clean, and ready when you are.
Reinforced Shrink Cover
Built for heavy parts, sharp edges, and long hauls. A reinforced liner is laminated into the film for added puncture and tear resistance. When the load is rough on packaging, this is the one to pick.
Optional Upgrades
Add what your application demands. Flame-retardant treatment for jobsite safety. VCI formulation to shield metal surfaces from rust during overseas shipping. UV block for prolonged outdoor storage. Available individually or combined — configured to your route and destination.
What You Gain with Custom Fit Shrink Covers
Standard shrink film works for standard shapes. When your product is anything but standard, the process breaks down — excess material, extra labor, and gaps in coverage. Here is what changes when the cover is built around your product.
No Film Left on the Floor
Roll-fed shrink film needs to be cut, wrapped, and trimmed. The pieces you cut off add up — wasted material you paid for. A pre-cut cover arrives exactly sized to your product. What you order is what you use. Nothing gets thrown away at the end of the job.
Less Time per Cover
Trimming and adjusting film around complex shapes eats up labor. A custom fit cover goes on in two moves — drape it over the product and apply heat. The film does the rest, pulling tight on its own. Fewer steps, fewer people, faster turnaround.
Coverage Where Standard Film Fails
Curved surfaces, protruding parts, deep recesses — standard film bunches up or leaves them exposed. A pre-formed cover follows the shape it was built for. Edges stay flush. Awkward geometry gets the same seal as flat sides.
One Cover, One Product
Stocking multiple film widths and thicknesses for different products creates inventory sprawl. With custom fit covers, each product gets one cover spec. Reordering is simple — same SKU, same fit, every time.
Modular & Prefabricated Construction
Industrial Equipment & Machinery Export
Long-Term Outdoor Storage
Custom Fit Shrink Cover — Built to Your Specs
Every product has its own shape, weight, and destination. The cover should match all three. Here is what you can specify when you order from ECOPACK.
Dimensions
Cut to your product measurements — length, width, height, and any irregular protrusions. No standard sizes. No "close enough."
Material Grade
Choose standard LLDPE for light to medium-duty protection, or reinforced film with a laminated liner for heavy loads and sharp edges.
Thickness
Available from 150 to 450 microns. Thinner for indoor storage and dust cover. Thicker for transport, outdoor exposure, and rough handling.
Color
Milky white is standard — opaque enough to conceal contents and block UV. Custom colors available on request.
Functional Additives
Add flame-retardant treatment, VCI rust protection, or enhanced UV blocking. Use one, or combine them — whatever the route and storage conditions call for.
Branding
Your logo, your project name, your label. Printed on the cover so every shipment carries your identity — not a generic wrap.
How Custom Fit Shrink Covers Come Together — From Your Drawing to a Finished Cover
A custom fit shrink cover is not pulled from a shelf. It starts with your specifications and moves through a few deliberate steps — each one making sure the cover fits the product, not the other way around.
Step1
You Send the Measurements
CAD drawings, 3D models, or a physical sample — whatever you have. We work with your format. Dimensions, shape, and any special areas that need reinforcement or ventilation are captured before production begins.
Step2
We Cut and Form to Your Specs
The cover is cut or pre-formed to match your product profile. No generic templates. No "close enough." What leaves our facility already fits your product before heat is ever applied.
Step3
Covers Arrive Ready to Use
Each cover is pre-sized and pre-formed. No cutting. No trimming. Pull one from the stack, drape it over the product, and move on to the last step.
Step4
Heat Shrinks It Tight
Apply heat with a standard heat gun or shrink tunnel. The film activates and pulls inward evenly — sealing around edges, corners, and contours without bunching or leaving gaps.
Contact Us
Tell us your product dimensions and application. We will recommend a custom fit shrink cover configuration that fits — and get you a quote.
Product Specifications
The numbers behind the film. Values shown are for standard LLDPE material. Reinforced and treated variants may differ — ask us for the data sheet that matches your configuration.
| Property | Specification |
| Material | Cross-linked LLDPE / PE blend; optional mPE for added toughness |
| Shrink Ratio | 2:1 crosswise; 1.5:1 lengthwise |
| Thickness Range | 150–450 microns (6–18 mil) |
| Color | Milky white (standard); custom colors available |
| UV Block | 99% UV blockage |
| Flame Retardant | Optional — available on request |
| VCI Treatment | Optional — protects ferrous and non-ferrous metals |
| Sizing | 100% custom — cut to your product dimensions |
| Application Method | Standard heat gun or shrink tunnel |
Your Custom Fit Shrink Cover Manufacturer
A shrink cover is only as good as the team that measures, cuts, and builds it. Here is what sits behind every cover that leaves our facility.
10+ Years in Industrial Shrink Packaging
We have spent over a decade focused on heat-shrink protection for industrial goods — not as a side line, not as one category among many. This is what we do. The experience shows up in how we handle complex shapes, tight tolerances, and demanding delivery schedules.
In-House Die-Cutting and Pre-Forming
We do not outsource the cutting and forming. Our own equipment handles it — from CAD file to finished cover under one roof. That means shorter lead times, direct quality control, and the ability to run small batches without a middleman markup.
Fast Prototyping, Small Batches Welcome
Need one cover to test before committing to a full order? We prototype. Running a pilot project that only needs a handful of units? We ship small quantities. No minimums that force you to order more than you need.
Global Export, Full Documentation
We ship to construction sites, manufacturing plants, and logistics hubs worldwide. Certifications and compliance documents are provided as needed. Language barriers are handled. Customs clearance is part of the process.
FAQs
Get Touch With Us
Ready to Get a Cover That Actually Fits?
+86-187-5758-6903 | +86-173-5721-9828
leizhitian@ceo.sh.cn | yanglifang@ceo.sh.cn
+86-189-1313-5729